(Admission Info) SLIET Entrance Test (SET) - 2011

Sant Longowal Institute of Engineering & Technology (SLIET)

Entrance Test (SET) – 2011

Sant Longowal Institute of Engineering & Technology (SLIET) has been established by the Government of India to provide technical education in emerging areas of Engineering & Technology. It caters to the technical manpower requirements at various levels by adopting a concept of modular system in imparting technical education with emphasis on practical training in industry. This institute was set up in 1991 in the memory of late Sant Harchand Singh Longowal and is fully funded by Ministry of Human Resources & Development, Government of India. The educational programmes of this institute are non-conventional, innovative, practical oriented and contain all aspects of new education policy (1986) of Govt. of India. The Institute offers programmes at Certificate, Diploma, Degree, Postgraduate (M.Tech. and MBA) levels in various branches of Engineering and Technology and Ph.D. programmes in Science, Management, Technology and Engineering. The programmes in the Institute provide direct entry at Certificate, Diploma, Degree, M.Tech. and MBA levels and vertical mobility at Diploma and Degree levels of education, besides non-formal education programmes. The Institute has acquired the status of a Deemed-to-be- University in the year 2007 (Notification No.F.9-42/2001-U.3).

Programme Structure:

• Certificate
• Diploma
• Degree
• MBA
• M.Tech
• Ph.D.

Certificate Programme:

The objective of the Certificate programme is to produce technically skilled manpower in appropriate areas. The meritorious students who wish to study further may join the higher programmes of SLIET.

• Qualification: The minimum qualification for admission to the Certificate programme is Matric pass (Pass in English, Mathematics and Science is compulsory) from a State Secondary Education Board/CBSE/ICSE/National Open School or an equivalent examination conducted by an Institution or School recognized by and affiliated to CBSE, New Delhi.
• Duration: The duration of the Certificate programme is 2 years.
• Admission Procedure: Admission to all Certificate courses shall be made on the basis of a National Level Entrance Test (SET-I).

Diploma Progaramme:

The objective of the Diploma programme is to produce supervisory level technical manpower. More emphasis is given on practical oriented class work with an extensive training in industry.

• Qualification: The minimum qualification for admission to the Diploma programmes is 10+2 pass with Physics, Chemistry & Mathematics from a recognized board/university or a Certificate pass from SLIET in any trade. Minimum Marks in the qualifying examination is 50% (45% in case of candidates belonging to reserved categories). The candidates who have studied Biotechnology or Computer Science or Biology instead of Chemistry at 10+2 level are also eligible. Board/CBSE/ICSE/National Open School or an equivalent examination conducted by an Institution or School recognized by and affiliated to CBSE, New Delhi.
• Duration: The duration of Diploma programme is 2 years.
• Admission Procedure: There are two categories of seats in this programme. (i) Vertical Entry Seats (ii) Direct Entry Seats

Degree Program

Degree programme is a continuation of technical expertise acquired in corresponding Diploma programmes and offers an opportunity to Diploma holders to obtain Degree in Engineering.

• Qualification: All candidates who have passed Diploma course in any discipline from SLIET or from any other polytechnic affiliated with any State Board of Technical Education and approved by All India Council for Technical Education (AICTE), securing 50% marks (45% in case of candidates belonging to reserved categories) are eligible to compete for admission to any of the Degree programmes..
• Duration: The duration of Degree programme is 3 years
• Admission Procedure: There are two categories of seats in this programme. (i) Vertical Entry Seats (ii) Direct Entry Seats

M.B.A. Programme:

• Qualification: A recognized Bachelor’s (three years) / Post-Graduate degree in any discipline or a pass in the final examination conducted by ICAI/ICWI/ICSI or AMIE. Minimum marks in the qualifying examination is 50% (45% in case of candidates belonging to reserved categories). Candidates appearing in final year Degree examination are eligible to apply and can take the test provisionally.
• Duration: The duration of the M.B.A. programme is 2 years.
• Admission Procedure: (i) For admission to MBA programmes, candidates will have to appear in SET-2011 (SET-VI) followed by Group Discussion and Interview (details at page 38).
  (ii) The candidates having valid CAT score / percentile will also be considered for admission but such candidates need not to appear in Entrance Test (SET-VI) of SET-2011. However, these candidates
  have to appear in Group Discussion and Interview (details at page 38). All the candidates aspiring to get admission through CAT will have to fill the Application Form of SET-2011 on or before the last date i.e. 30.04.2011.
• Number of Seats: 34

M. Tech Programme:

The objective of M.Tech. programme is a continuation of technical expertise acquired in qualifying Degree Programmes. This will also offer the opportunity to the candidate to acquire skill to work on R&D projects and to promote industry institute interaction.

• Qualification: Admission to Master of Technology (M.Tech.) course will be open to a candidate who obtains at least 50% marks (45% in case of candidates belonging to reserved catagories) in the aggregate in qualifying examination and (1) holds a B.Tech./B.E. degree of recognized University/Institute in the appropriate branch. OR (2) has passed Section ‘B’ of the Institution of Engineers (India) or Grade IETE and has three years of professional experience in reputed organization. OR (3) Candidates are also eligible for admission in various M.Tech. courses as under : (i) M.Tech. (Manufacturing Systems Engineering): Candidate should have B.E./ B.Tech. degree in Manufacturing Engineering / Mechanical Engineering / Production Engineering / Industrial Engineering or equivalent (ii) M.Tech. Mechanical Engg. (Welding and Fabrication): andidate should have B.E./ B.Tech. degree in Manufacturing Engineering / Mechanical Engineering / Production Engineering / Industrial Engineering or equivalent (iii) M.Tech. (Food Engineering & Technology): Candidate should have B.E./B.Tech./ M.Sc. degree in Food Technology / Food Engineering / Agricultural & Food Engineering or equivalent (iv) M.Tech. (Instrumentation & Control Engineering): Candidate should have B.E./ B.Tech. degree in Electrical Engineering or Instrumentation & Control or Electrical and Electronics Engineering or Instrumentation Engineering or Electronics Engineering or Computer Engineering or Electronics & Instrumentation Engineering or Electronics & Communication Engineering or equivalent (v) M.Tech. (Polymer): Candidate should have B.E. / B.Tech. in Polymer Technology or Chemical Engineering or M.Sc. (Chemistry) or equivalent (vi) M.Tech. (Electronics & Communication Engineering): Candidate should have B.E./ B.Tech. degree in Electronics & Communication Engineering or Electrical and Electronics Engineering or Electronics & Instrumentation Engineering or Computer Engineering or equivalent
• Duration: The duration of M.Tech. programme is Two Years.
• Admission Procedure: (i) Candidate with 50% marks (45% in case of candidates belonging to reserved categories) in Degree programme is eligible for admission to M.Tech.programme. (ii) Candidates aspiring to get admission in the Master’s degree Programmes need not to appear in the entrance test SET-2011 provided they have cleared GATE Examination with qualifying marks and relevant engineering degree as mentioned at 2.6 (a). However such candidates have to fill the Application Form of SET-2011 on or before the last date i.e. 30.04.2011. Candidates having an engineering degree without GATE or M.Sc. degree with or without GATE (if eligibility exists for M.Sc.) have to appear in SET-2011 (SET-VI). (iii) For admission to M.Tech. courses, first preference will be given to the candidates having GATE qualifying marks and relevant engineering degree and their admission shall be made on the basis of merit of GATE marks. (iv) If seats remain vacant then admission will be on the basis of SLIET entrance examination SET-VI.

Ph.D. Programme:

Candidates interested for admission in Ph.D. Programme can directly contact to Dean (R&C). For more details, please contact at Phone Nos. 01672-253174, 253108 or email at bcsarkar[at]yahoo.com

SLIET Entrance Test-2011

Entrance Test conducted for admission to Certificate, Diploma, Degree and PG programme is termed as SLIET Entrance Test-I (SET-I), SLIET Entrance Test-II (SET-II), SLIET Entrance Test-III (SET-III) and SLIET Entrance Test-VI (SET- VI), respectively.

The separate entrance test for admission to vertical entry seats of Diploma and Degree programme for SLIET students shall be termed as SLIET Entrance Test-IV (SET-IV) and SLIET Entrance Test-V (SET-V), respectively and shall be conducted only for the SLIET students on a separate date (June 12, 2011).

Pattern of Examination:

• SET-I will have two papers each of two hours duration. Paper-I will include English, General Awareness & Mathematics and Paper-II will pertain to Physics and Chemistry.
• SET-II will have two papers. Paper-I will include English and Mathematics and Paper-II will include Physics & Chemistry, each of two hours duration.
• SET-III shall have two papers each of two hour duration. Paper-I will pertain to English, General Knowledge, Mental Aptitude, Mathemathics, Physics and Chemistry. Paper-II will pertain to Basics of Engineering.
• SET-IV shall have two papers each of two hours duration. Paper-I will include Physics, Chemistry, Mathematics & English studied in Certificate programme and Paper-II will include branch syllabi studied in Certificate programme.
• SET-V shall have two papers each of two hours duration. Paper-I will pertain to Mathematics, General Knowledge and Mental Aptitude. Paper-II will pertain to one of the disciplines viz; (i) Computer Science & Engineering (ii) Electronics & Communication Engineering (iii) Instrumentation Engineering (iv) Mechanical Engineering (v) Chemical Technology and (vi) Food Technology.
• SET-VI will have only one paper related to the concerned M.Tech & similarly for MBA programme only one paper shall be conducted and shall be of two hours duration for both M.Tech / MBA programmes.

Schedule of Test:

Application Fee:

Each Application Form must accompany an application fee of Rs.600/- (Rs.300/- for SC/ST) in the form of :

• Cash Receipt of the Institute OR
• Cash deposited Pay-in-Slip Receipt at designated Axis Bank Branches OR
• Crossed Demand Draft drawn in favour of “THE DIRECTOR, SLIET” payable at Longowal or Sangrur (Demand Draft should be preferably of Central Bank of India OR State Bank of India OR Oriental Bank of
  Commerce OR Punjab National Bank OR State Bank of Patiala OR ICICI Bank).

Admit Cards:

Admit Cards will be issued only to those eligible candidates who have submitted the application form complete in all respects and with requisite fee before the closing date. The admit card shall be despatched Under Postal Certificate (UPC) and the Institute shall not be held responsible for any postal delay or irregularity leading to the applicant not receiving the admit card in time. The admit card will bear the name of the candidate, father’s name, roll number, application number, address of the examination centre allotted, name of the SET Examination and the examination schedule. The candidate should carefully examine the admit card received by him/her for all the entries made therein. If the admit card is not received/ found incomplete in any way, the candidate should contact/inform the issuing authority immediately but not later than30.05.2011.
The roll number is the prime mean of locating the application and it should always be quoted in all correspondence & enquiry.

Counseling:

The exact schedule of counseling and number of candidates called will be displayed on the website of the Institute namely www.sliet.ac.in. No separate Call Letters will be sent to the candidates for attending Counselling. However, if a candidate fails to attend counseling in time due to any reason, he may appear in the next available counseling. Such candidate will have to keep track of the next available counseling schedule which will be available on Institute website and participate therein without waiting for any intimation in this behalf. His/her claim in such subsequent counseling in which he/she may participate may be considered in accordance with his/her merit/choice and availability of seats in a particular trade/ branch/specialization during the said subsequent counseling.

Important Links:

• General Information
• List of Sale Centre-Axis Bank Branches for Sale of Information Brochure
• Syllabus for SET-IV (Vertical Promotion) (Only for SLIET Certificate 2009 Batch Students)
• Syllabus for SET-V (Vertical Promotion) (Only for SLIET Diploma 2009 Batch Students)

Last date for submission of application is 30th April, 2011.

Contact Details:

Phone: 01672-280072, 253136
Email Id: setchairman2011[at]gmail.com
Website: www.sliet.ac.in

Click Here For Full Details

Get Your Dream Job.Post Your Resume Online.